Rollbag® R3200 HS Med

Automatic Pouching System for Medical Products

The Rollbag R3200 HS Med Automatic Bagger is a medical pouch sealing system for automatic packaging. This medical pouch sealer is capable of being independently validated and is designed for cleanroom use and can package products at speeds of up to 40 bags per minute using Tyvek® Poly or medical-grade paper rollstock (subject to material spec and bag size). Products packaged on the Rollbag R3200 HS Med Automatic Bagger are suitable for use with an autoclave or sterilizer.

The Rollbag R3200 HS Med features a 1-year limited warranty.

Tyvek® is a registered trademark of E. I. du Pont de Nemours

Videos

"

Specifications

ModelRollbag R3200 HS Med Automatic Bagger
SpeedUp to 40 bags/min
(dependent on bag size, thickness, & product)
Bag Width2" - 14"
Bag Length3" - 32"
Bag Thickness1 - 5mil
Seal Bar OpeningUp to 6"
Electrical Requirement120V @ 15A
Air Requirement80psi @ 5CFM
Warranty1 year limited warranty
Dimensions (W x D x H)34" x 52" x 44"

Features

Operating Benefits

  • Chevron Bagmaker Assembly—The bagmaker assembly is equipped with a 5/16” wide Chevron seal. With this feature rollstock up to 14″ wide can be used.
  • Interface Port—Allows the bagger to communicate to external devices. When integrating the bagger, it can be set to either master or slave mode. This option includes the integration cable.
  • Seal Flattener Fingers—The seal flattener fingers go into the bag and stretch it taught prior to sealing, to minimize wrinkles in the seal area. This feature is ideal for bags that are filled with heavy products or ones that tend to pull on one size of the bag when it is filled.
  • Air Expeller—The air expeller is a plate with a foam pad. This device presses against the bag prior to sealing, removing excess air.
  • Articulating Bag Support—This option supports the bag during the sealing process. At the end of the cycle the load shelf tilts down at an angle, dispensing the bag to the next step of the packaging operation. The maximum bag length with the standard articulating bag support is 18″.
  • Foot Switch—Instead of using the start button, the cycle is activated via a foot switch. With this option the operator can have both hands free during filling of the bag.

Set-Up Benefits

  • End of Roll Sensor—This sensor detects when the roll of bags is nearly empty and stops the bagger in order to allow changeover to a new roll of film.
  • Film Guides—The film guides assure that the packaging material goes straight into the bagger by keeping the film in a fixed position. This option is ideal for narrow bags and poly tubing.

Safety Benefits

  • Light Curtain—Prevents the operation of the bagger when the optical detection field is obstructed. Can also be used to trigger the start of the cycle, once the obstruction is no longer detected.

Maintenance Benefits

  • Stainless Steel Frame—This feature is for medical environments that require a stainless steel frame for cleaning and hygiene purposes.

Options

Thermal Transfer Printer
If you need to print large text, images, or barcodes on your bag, then a thermal transfer printer is the right solution. Our thermal transfer printer is available in a 4″ width.
Label Printer Applicator
Integrated label printer applicator ties into warehouse management system to print and apply a label directly on the outside of the bag.
Bag Support Outfeed Conveyor
Instead of a load shelf to support the bag, it is possible to use a bag support outfeed conveyor. This conveyor supports and lifts the bags during sealing, after which the sealed bags are transported to the left or right side of the bagger. This conveyor allows the operator to comfortably stand or sit in front of the bagger during packaging.
Adjustable Hole Punch
A pneumatic punch that puts a small perforated hole (flutter vent) in the bag, allowing for excess air to escape.
Hang Hole
Pneumatic punch that puts a round hang hole centered in the bag, below the seal area, to hang it on a rack.
Incline Outfeed Conveyor
The incline outfeed conveyor transports bags from the bagger up to table height. With every cycle of the bagger, the conveyor indexes one step. It consists of a horizontal section where the bag is dropped and an inclined section. The height and angle of the inclined section are adjustable. The conveyor is made of stainless steel and equipped with casters. The conveyor can be put in front of the bagger, like in the picture, or to the side of the machine.

ADDITIONAL OPTIONS

Spare Parts Kit
This kit includes basic consumable and replacement parts for the machine. These parts include PTFE seal bar cover, pressure rubber, and perforation knife.

Request A Quote

Name(Required)
This field is for validation purposes and should be left unchanged.

Newsletter Sign Up

* indicates required
Email Sign Up *
Name(Required)
This field is for validation purposes and should be left unchanged.

Instant Quote

This field is for validation purposes and should be left unchanged.