PAC PI Impulse Sealer

Pneumatic Impulse Sealer

The PAC PI is a heavy-duty pneumatic impulse sealer that is built to provide years of trouble-free service. With two heated seal jaws that create a 5/16″ wide seal, the PI impulse sealer can seal thick poly bags and films. The PI’s seal head pivots from horizontal to vertical, to meet a wide variety of packaging line configurations for bags up to 36” wide. The PAC PI Twin version has two seal head castings to provide the necessary pressure for longer seal lengths (36″ – 54″)

The PI impulse sealer is available with a number of options to better tailor the sealer to the requirements of the packaging application. The optional bag stretcher is comprised of two fingers that slip into the bag before sealing and automatically extend the edges of the bag, pulling it tight to minimize wrinkles in the seal. The optional stainless steel work shelf and bag support simplifies bag positioning by supporting the product during sealing.

The PAC PI Impulse Sealer is made in the USA and includes a 3 year limited warranty.

Videos

Specifications

ModelPI Impulse Sealer
Seal Lengths12", 18", 24", 30", 36", 36" - 54" with twin head
Seal Width5/16″ in top and bottom seal jaws
Sealing systemThermal impulse
Air requirement (min)100 psi
Electrical requirement120V
Dimensions26" - 39" W x 32" D x 58" H
Warranty3 year limited
Country of ManufactureUSA

Features

Operating Features

  • Adjustable seal head angle to accommodate product orientation
  • Convenient footswitch cycle activation
  • Rugged frame for stable, long-lasting performance
  • Straightforward user controls help assure excellent results
  • 3 year limited warranty

Sealing Features

  • Bi-active (top and bottom heat) pneumatically activated jaws for seal reliability
  • Thermal impulse time control system does not require any warm-up time
  • SureTemp temperature controller ensures seal quality by maintaining seal temperature to a precise setting (optional)
  • Bag stretcher minimize wrinkles in the seal (optional)

Safety Features

  • Spring closing safety system with release if obstruction is detected
  • Jaw close timeout with release when delay is detected
  • High heat only present when seal jaws are closed and under pressure
  • Heavy duty seal transformer with thermal overload protection

Options

Sealing Options

  • Bag Stretcher: Fingers fit inside edges of the bag to minimizes wrinkles in the seal area
  • Work Shelf & Bag Support: Supports the product during the packaging cycle
  • SureTemp Temperature Controller: Ensures consistent seal quality (up to 350°F)
  • High Pressure Seal: Increases seal pressure for heavy materials
  • Extra Power: Additional seal transformers for production at high rates
  • Seal Jaw Selector Switch: Allows bottom seal jaw to be turned off
  • Bag Stop: Allows bag to always be sealed in the same location
  • Twin Seals: Two seals that are ⅛” apart
  • Trim Seal: Trims off the area of the bag above the seal

Safety Options

  • Emergency Stop Button
  • Two Stage Cycle Engagement: Jaws close by footswitch, cycle initiated by dual palm buttons
  • Locking Control Box Cover: Cover on control cabinet to prevent unauthorized setting changes
  • Dual Palm Buttons: Prevents operator contact with seal jaws during closure
  • Motorized Crank Adjustable Frame: Adjust the operating height of the machine for improved ergonomics (12” travel)
  • Locking Control Box Cover
  • Palm Switch Cycle Activation

Other Options

  • SureSeal Digital Interface: Includes 9 program job storage
  • Stainless Steel Frame: For wet or corrosive environments
  • Work shelf & Bag Support: Supports the product during the packaging cycle
  • Ported Exhaust: For plumbing exhaust air out of a cleanroom
  • Hot Embosser: Up to 8 brass characters above the seal
  • Hot Stamp Printer: Hot embosser above the seal
  • Embosser/Printer
  • 220 Volt Wiring
  • CE Compliant Design

Request A Quote

Name(Required)
This field is for validation purposes and should be left unchanged.

Newsletter Sign Up

* indicates required
Email Sign Up *
Name(Required)
This field is for validation purposes and should be left unchanged.

Instant Quote

This field is for validation purposes and should be left unchanged.